For this how-to I’m using a vintage Studio Twelve “Multi-Fleur” loom. It’s about 3 ½” across and has 2 rows of pegs. The pegs are numbered 1-12 going counter clockwise. When you are first learning it’s probably a good idea to follow the numbers but honestly once you get the hang of it you don’t really need to.
You can use yarn, ribbon, string and even wire on a flower loom - but for a real 60s-70s look you'll want to use raffia. I love the look of the vintage “Swistraw” – especially the colors and textures . But the synthetic raffia now marketed as gift ribbon is basically the same thing. The raffia I used for this tutorial is from Rafft Ribbons. Paper Mart offers a less expensive option. Just make sure it's synthetic and not paper raffia as paper raffia tears. Natural raffia I have found is too thick. Try experimenting with different materials- you never know what you'll come up with!
Start with 36” tail and secure material in the notch near peg #7. Working counterclockwise wrap your material around each of the outer pegs. You work in a "figure 8" as you wrap the material around opposite pegs (1 to 7, 2 to 8, 3 to 9, 4 to 10, 5 to 11). Each time all the way around the loom creates 1 layer. Go completely around 2 to 3 times (i.e. 2 - 3 layers). Secure end in notch leaving an 8” tail.
How to wrap the material around the pegs in a "figure 8".
The first layer
Repeat step 1 except do the inner pegs with a different color. 1 - 2 layers is good. This time you only need to leave 8” tails.
The second layer.
STEP 3 - THE BACK STITCH
Using a long sharp craft needle w/ a big eye and thread the 36” tail (from step one). Come up at space 11 and down through space 12, up space 1 down space 12, up space 2 down space 1, up space 3 down space 2 and so on until you go all the way around. Make sure you go in between the petals and do not pierce the material.
Detail of back stitch.
Completed back stitch.
STEP 4 - SLANT STITCH
You should have ended up at space 1 from your previous step. Go over 3 spokes to the right and go in between the petal and come back up at space 12 (2 petals to the left), over 3 spokes and down through the petal. Repeat all the way around and complete the final stitch by going under the first slant stitch to create a continuous look.
Completed Slant Stitch
Turn loom over and secure by knotting tails and snip off excess. Gently remove flower from loom.
This is what the flower looks like right after you take it off the loom.
Fluff the petals as desired.
Hope you enjoyed this tutorial! This shows you how to make a basic flower. I think it's always best to get the basics down first. You will then be ready to play around with different ideas and have some fun. There are many ways to use a flower loom and tons of options and variations.
I would also like to point you in the direction of the amazing Knitting -and website where you will find some more advanced flower loom tutorials that should be of help.
If you want to know how to make the "poof" center scroll down and watch the Martha video.
Feel free to print this tutorial out. I do ask that it's kept for personal use only. Thanks!